|
| 条带充填置换条带煤柱技术研究 |
| Study on technology of on replacing strip coal pillars by strip-filling mining |
| |
| DOI： |
| 中文关键词: 条带充填 条带煤柱 桥墩作用 强度 宽度 |
| 英文关键词: strip-filling strip coal pillars work as bridge piers strength width |
| 基金项目:国家重点基础研究发展规划(973计划)(2012CB723104) |
|
| 摘要点击次数: 2583 |
| 全文下载次数: 154 |
| 中文摘要: |
| 提出并阐明了采用条带充填开采置换条带煤柱的基理,分析了影响置换充填开采的关键因素,从充填体宽度、强度及充填方法方面研究了最佳充填开采模式.研究结果表明：条带充填体置换煤柱过程中,条带充填体起到“桥墩”作用,合理设计“桥墩”的支撑强度、宽度及充填方法以控制“关键层”运动幅度,是实现矿山压力的平稳转移和覆岩运动有效控制的关键;采场“关键层”的沉降量与“桥墩”的弹性模量E和宽度D密切相关,通过研究“关键层”的沉降量及充填成本与“桥墩”的弹性模量E和宽度D的关系可以确定最佳“桥墩”的弹性模量E和宽度D;采场的安全系数θ由充填体强度σt与宽度D决定,通过研究安全系数及充填成本与充填体强度及宽度的关系可以确定最佳充填体强度. |
| 英文摘要: |
| A theory of adopting strip-filling mining replacing strip coal pillars was put forward and clarified, and the key effects of filling replacement mining was analyzed. Optimum mining pattern was researched based on the width, strength and filling methods of filling bodies. The research results show that in the process of strip-filling bodies replacing coal pillars the strip-filling bodies work as bridge piers. The supporting strength, size and filling methods are designed reasonably to control the movement range of the key layers and to realize the steady transferring of mine ground pressure and effective control of overlying strata’s movement. The subsidence amount of stope’s key layers is closely related with bridge piers’ modulus of elasticity-E and the width-D so that the optimum piers’ modulus of elasticity-E and its width-D is determined by means of studying the relations between the subsidence amount of key layers with filling cost and the piers’ modulus of elasticity-E and its width-D. The stope’s safety factor is determined by the filling bodies’ width and strength and the optimum strength of filling bodies can be determined by studying the relations between safety factor with filling cost and filling bodies’ strength and width. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
