文章摘要
喷射GFRP加固砌体柱抗压承载力分析
Compressive bearing capacity analysis of masonry columns strengthened by SGFRP
  
DOI:
中文关键词: 喷射玻璃纤维聚合物(SGFRP)  砌体柱  加固  抗压承载力
英文关键词: SGFRP  masonry column  reinforcement  compressive bearing capacity
基金项目:国家自然科学基金青年科学基金项目(50708084)
作者单位
张智1, 谷倩2 1.武汉工业学院 土木工程与建筑学院, 湖北 武汉 430023
2.武汉理工大学 土木工程与建筑学院,湖北 武汉 430070 
摘要点击次数: 1178
全文下载次数: 216
中文摘要:
      喷射玻璃纤维聚合物(SGFRP)加固8个砌体柱试件,分别进行轴心受压试验和偏心受压试验研究,描述了试验砌体柱的破坏形态,分析了喷射玻璃纤维聚合物抗压加固砌体柱的加固效果.试验结果表明:加固对砌体柱的极限承载能力有较大的提高.不同的喷射GFRP厚度、短切纤维长度以及是否贴玻璃纤维布对砌体柱的承载力也有一定的影响,通过对比不同加固方式与承载力的关系,提出合理的加固建议.文中还根据砌体柱的材料力学特征建立计算模型,并结合试验研究提出相应的受压承载力计算公式,为定量分析喷射GFRP加固砌体柱进行了探讨.
英文摘要:
      8 masonry columns were strengthened by Sprayed Glass Fiber Reinforced Polymer (SGFRP), and the experiments of eccentric compression and axial compression were presented. The failure mode and strengthening effects of the masonry columns strengthened by SGFRP were discussed. The results showed that the bearing capacity of the reinforcing columns increased greatly. Comparing the bearing capacity of the columns when the thickness of SGFRP, the length of fiber and whether paste class fiber cloth are different, some reasonable reinforce suggestions are proposed. In addition, a calculation model was created based on the mechanical characteristics of the material of masonry, and the compressive bearing capacity formula is proposed combining the experimental research. The work investigated the effect of masonry columns strengthened by SGFRP quantitatively.
查看全文   查看/发表评论  下载PDF阅读器
关闭