|
| 考虑齿轮泵性能的公差优化设计 |
| Abstract: In this paper, considering the gear pump performance and the important factors influencing the performance end clearance at the same time, the introduction of the concept of the optimal clearance tolerance optimization model is established. Finally in a type of gear pump as an example to verify the validity of the model. |
| 投稿时间：2015-03-17 修订日期：2015-04-27 |
| DOI： |
| 中文关键词: 公差优化 齿轮泵 |
| 英文关键词: Multi-objective optimization The gear pump |
| 基金项目:国家自然科学基金资助项目(51175171) |
|
| 摘要点击次数: 2007 |
| 全文下载次数: 1326 |
| 中文摘要: |
| 考虑齿轮泵性能与影响性能的重要因素端面间隙，探讨性能、间隙与公差之间的映射关系。引入最优间隙的概念，定义新函数为装配间隙与最优间隙之差，以新函数与齿轮泵性能为目标函数，各关键零部件的公差加工精度为约束，建立公差优化模型，利用上述优化模型计算出齿轮泵齿轮机构与装配组成环的公差，为齿轮泵公差优化设计提供了依据，最后以某型号齿轮泵为例，验证该模型的有效性。 |
| 英文摘要: |
| Considering the gear pump performance and the important factors influencing the performance end clearance, discusses the mapping relationship between performance, clearance and tolerance. Introducing the concept of the optimal clearance, defining a new function for the assembly and the difference between the optimal clearance, clearance with new function and gear pump performance as objective function, the tolerance of key parts machining accuracy as constraint, tolerance optimization model is established, using the above optimization model to calculate the gear pump gear mechanism and the assembling tolerance of ring, provides the basis for the gear pump tolerance optimization design, finally, a type of gear pump as an example, verify the validity of the model. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
